Urban Designer Watch Instructions
1. Chronograph Watches
Setting the time and date
To adjust the date pull the crown out to the first click. Then turn the crown clockwise until the preview day's date* appears. After this pull out the crown to the second click** when the second hand is at position 12:00. It will stop on the spot. Then set the hands to the desired time of the day (make sure AM/PM is set correctly) by turning the crown.
After setting the correct time, push the crown back in the normal position.
*Don’t set the date between 21:00 and 01:00 (the date may not change the next day). If it is necessary to set the date during that time period, firstly change the time to any time outside, set the date and then reset to the correct time.
**When the crown is at the second click position, do not press any button. Otherwise the chronograph hands will move.
Stopwatch
This model has an integrated stopwatch that can be started and stopped with button A and reset with button B. You can also measure a split time by pressing button B during the stop function (the stopwatch stops = 1st split time, but continues to run in the background). Pressing button A again will stop the 2nd split time.
Then press button B to display the other split time. When you press button B again, the measured time is displayed.
You can set the second hand of the stopwatch by pulling the crown out twice until the watch stops completely. Now you can adjust the hand with the two buttons A and B. The minute hand is moved back. You can reset the minute hand by resetting the second hand until it is also at 0.
2. Date Only Watches
SETTING THE TIME (SCREW CROWN OR PUSH CROWN)
1. SCREW: Unscrew and pull out the crown to the 2nd position (second click).
PUSH: Pull out the crown to the 2nd position.
2. Rotate the crown to set the hour and minute hands.
3. SCREW: Push the crown back in and screw it back to the normal position.
PUSH: Push the crown back in to the normal position.
SETTING THE DATE (SCREW CROWN OR PUSH CROWN)
1. SCREW: Unscrew and pull out the crown to the 1st position (first click).
PUSH: Pull out the crown to the 1st position.
2. Rotate the crown clockwise (upward) to set the date.
3. SCREW: Push the crown back in and screw it back to the normal position.
PUSH: Push the crown back in to the normal position.
If the date is changed between 9:00 PM (21:00) and 2:00 AM, set the date to the following day because no date change will take place at midnight.